The Vertex S-Series stand-on zero-turn mowers are ready to take your productivity and profitability to the next level. With a design that centralizes mass low in the mower chassis, Vertex is ultra-maneuverable, yet stable and easy to control. The control panel is ergonomically designed and centrally located to improve operator comfort. Exmark's proven hydro drive system delivers ground speeds of up to 8.5mph, enabling Vertex to quickly finish large jobs. Built with a Kawasaki V-Twin or Kohler EFI engine to increase fuel efficiency so you can stay out in the field longer. Choose from 48-, 52-, or 60-inch UltraCut Series 4 side-discharge cutting decks, featuring easy rake adjustment and anti-scalp rollers, for an Exmark signature finish cut quality every time.
VXS730GKA52400 Specs & Compare
| EQUIPMENT | ||
| UPC | 193308221809 | |
| Starter | Electric | |
| Steering Control | Twin levers with center fixed reference bar for ease of control forward and reverse | |
| Front Caster Tires | 13 x 5.0-6, smooth-tread, semipneumatic tires with tapered roller bearings. | |
| Drive Tires | 20x10.0-8 Carlisle Turf Master | |
| Parking Brake | Lever-actuated bar brake. | |
| Tractor Frame | Welded, heavy-duty 1.5" x 2.5" tubular steel. | |
| Blade Spindles | No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft. | |
| Cup Holder | Yes | |
| Electrical | 12-volt battery with 15-amp alternator. | |
| Standard Features | Enhanced Engine Hour Meter | |
| POWER COMPONENTS | ||
| Engine Brand | Kawasaki | |
| Transmission Speeds | Infinitely Variable | |
| Transmission Brand | Hydro-Gear | |
| Engine Model | FX730V | |
| Engine Displacement | 726 | |
| Engine Series | V-Twin | |
| Fuel System | Carbureted | |
| Speed | Infinitely variable speed selection 0-8.5 mph (x.x kmph) forward, 0-x.x mph (x.x kmph) reverse | |
| Transmission | Hydrostatic | |
| Engine Speed | 3,750 rpm | |
| Air Filter | Heavy-duty canister air filtration system | |
| Fuel Capacity | 8-gallon (xx.x-L), single fuel tank on LH side. | |
| Drive Description | Two Hydro-Gear 12 cc pumps powering two Parker 14.5 cubic inch motors. | |
| Fuel Type | Gas Carbureted | |
| PTO Engagement | Warner 200 ft-lb clutch | |
| Drive System | HYDRO | |
| Drive Wheel Release | Allows unit movement without engine running. | |
| Fuel Indicator | Yes - Float Gauge | |
| Deck Lift | Single point HOC; with mechanical lift-assist springs. | |
| Carb Compliant | NO | |
| Safety Package | Operator Presence Controls (OPC) with safety interlock system indicators | |
| DECKS | ||
| Deck Style | Floating Deck | |
| Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | |
| Width / Cutting Deck | 52" | |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt | |
| Cutting Heights | 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator's platform. | |
| Blade Tip Speed | Approximately 18,500 fpm. | |
| Blades | 3 Blades at 18.00" Length | |
| DIMENSIONS | ||
| Width | 64.79 | |
| Height | 49.2 | |
| Length | 65.33 | |
| Curb Weight | 936 |
VXS730GKA52400 Features & Benefits
Design Simplicity
Operating a Vertex mower is easy, thanks to the simple, ergonomic design. Key, choke, throttle, height of cut adjustment...they're all right there. Hop on, and you're ready to go.
Operator Comfort
Designed to place the operator in a position of comfortable control. The wide, open platform offers more room for the operator to adjust their stance, while the ergonomic control panel places all vital controls close for easy reach and operation.
Cut Quality
All models are equipped with Exmark UltraCut Series 4 side-discharge cutting decks. The decks feature flow-control baffles, anti-scalp rollers, and a rod-style floating deck design for easy deck rake adjustments. The result is a signature cut quality on any turf type.
Reduced Maintenance
With no in-season grease points, flat-free semi-pneumatic front caster tires, and maintenance-free sealed bearing cutter housings, Vertex S-Series is designed to minimize in-season maintenance and the downtime that goes with it.
Ease Of Service
These units are easy to service thanks to the tools-free access to the engine and hydro drive components. The reliable single-belt drive system is simple and easy to maintain, and Exmark’s patented spherical idler bearings require only annual lubrication.
Commercial Engine
Choose from a fuel-saving EFI Kohler or carbureted Kawasaki commercial engine. Both engines feature heavy-duty canister-style air filtration systems and pressurized lubrication for maximum durability in daily commercial use.
Single-Point Height of Cut
The single-point height of cut makes it easy to accurately set deck height without tools. This enables the operator to quickly change cut height by simply raising and lowering the deck.
Ultracut Series 4 Deck
This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
VXS730GKA52400 Attachments & Accessories
Request Demo
Request A Demo
Fields with asterisks* are required.