Designed to raise the bar for stand-on mower performance and productivity, Vertex X-Series uses the same formed and welded tubular steel frame and heavy-duty 15-inch casters as our premier Lazer Z zero-turn riding mowers. With carbureted Kawasaki FX1000 engines, you'll have the power to finish jobs faster, with a better quality of cut thanks to our unmatched UltraCut cutting decks. One look and it's easy to see why the Vertex X-Series is the next generation of stand-on mowers.
VXX999EKA52600 Specs & Compare
| EQUIPMENT | |
| UPC | 193308240671 |
| Starter | Electric |
| Steering Control | Twin levers with center fixed reference bar for ease of control forward and reverse |
| Front Caster Tires | 15 x 6.0-6, smooth-tread, semipneumatic tires with tapered roller bearings. |
| Drive Tires | 24x9.0-12 Hoosier Grass Master |
| Tractor Frame | Welded, heavy-duty 1.5" x 3.0" tubular steel. |
| Cup Holder | Yes |
| Electrical | 12-volt battery with 30-amp alternator. |
| Standard Features | Enhanced Engine Hour Meter |
| POWER COMPONENTS | |
| Transmission Brand | Hydro-Gear |
| Engine Brand | Kawasaki |
| Transmission Speeds | Infinitely Variable |
| Engine Model | FX1000V |
| Engine Displacement | 999 |
| Transmission | Hydrostatic |
| Fuel System | Electronic Fuel Injected |
| Speed | Infinitely variable speed selection 0-12.0 mph (19.3 kmph) forward, 0-5.0 mph (8.0 kmph) reverse |
| Engine Series | V-Twin |
| Engine Speed | 3,600 rpm |
| Air Filter | Heavy-duty canister air filtration system |
| Fuel Capacity | 14-gallon (53.0-L), Dual fuel tanks on RH and LH side. |
| Fuel Type | Gas EFI |
| PTO Engagement | Warner 250 ft-lb clutch |
| Drive Wheel Release | Allows unit movement without engine running. |
| Fuel Indicator | Yes - Float Gauge |
| Deck Lift | Single point HOC; with mechanical lift-assist springs. |
| Carb Compliant | NO |
| Carb Compliant | NO |
| Safety Package | Operator Presence Controls (OPC) with safety interlock system indicators |
| DIMENSIONS | |
| Width | 64.79 |
| Height | 48.75 |
| Length | 70 |
| Curb Weight | 1250 |
| DECKS | |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 6. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width / Cutting Deck | 52" |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt |
| Cutting Heights | 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator's platform. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Blades | 3 Blades at 18.00" Length |
VXX999EKA52600 Features & Benefits
Professional Productivity
When equipped with the 72-inch UltraCut Series 6 cutting deck, Vertex X-Series can cut more than seven acres per hour, with Exmark’s signature quality of cut. Adjust cut height quickly and easily from 1.5- to 5.0-inches with the single-point height of cut adjustment system. And with 14-gallons of fuel capacity, Vertex X-Series delivers maximum runtime between fill-ups.
Operator Focused Design
The Vertex X-Series optimizes operator comfort with bolstered operator pad and suspended operator platform located low and centered between the rear wheels. When combined with the easy-to-use dual-action controls, you’ll feel balanced and in control of any situation.
Engineered for Low Maintenance
We engineered Vertex X-Series to run all season without maintenance, virtually eliminating productivity killing in-season downtime. And when it’s time for maintenance, we’ve made it easy to do with features including a magnetic operator pad that’s removable without tools, and an open architecture that enables easy access to the engine and hydro drive system.
Wide, Stable Design
The Vertex X-Series is designed with a wide stance for increased stability. Large 24-inch drive tires provide increased traction and ride quality, with reduced turf compaction. Heavy-duty 15-inch casters with semi-pneumatic caster tires deliver unmatched stability and durability.
VXX999EKA52600 Attachments & Accessories
Request Demo
Request A Demo
Fields with asterisks* are required.