When maximum productivity, durability, and cut quality are your priorities, the new Exmark Lazer Z Diesel zero-turn mowers are the right choice. When equipped with the new industry-leading 144-inch UltraCut™ Flex Wing cutting deck, the Lazer Z Diesel can mow 11.5 acres per hour, making it the most productive mower Exmark has built. Powered by a cutting-edge Yanmar diesel engine, large drive tires allow you to reach ground speeds up to 12.5 MPH with the 96" deck. The Lazer Z Diesel is also available with 60 and 72-inch UltraCut™ cutting decks. Delivering a high-quality cut, the flex wings on the 96-inch and 144-inch decks pivot 20-degrees up and 15-degrees down on sloping terrain.
The Lazer Z Diesel zero-turn mower delivers unparalleled durability and precision maneuverability. So, if you’re looking for our top-of-the-line, most productive mower, the Lazer Z Diesel mower is the best option for you.
LZS80TDYM604W0 Specs & Compare
| UPC | 193308000770 |
| Onboard Intelligence | RED Technology |
| Starter | Electric |
| Steering Control | Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Caster Forks | .50" thick caster yoke arms. |
| Front Caster Tires | 13 x 5.0-6, smooth-tread, semi-pneumatic. |
| Drive Tires | 23 x 9.50-12, 4 ply Super Turf® |
| Parking Brake | Lever-actuated disc brake. |
| Tractor Frame | Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver. |
| Electrical | 12-volt battery with 15-amp alternator. |
| Standard Features | Engine hour meter and cup holder |
| Seat | Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Power Components | |
| Engine Brand | Yanmar |
| Transmission Speeds | Infinitely Variable |
| Engine Model | 3TNV80FT |
| Engine Displacement | 852 |
| Engine Series | TNV |
| Fuel System | Electronically Governed IDI Turbo Diesel |
| Speed | Infinitely variable speed selection from 0-10.0 mph (16.1 kmph) forward, 0-7.0 mph (11.3 kmph) reverse |
| Transmission | Hydrostatic |
| Drive | Hydro-Drive |
| Engine Spec | FX801V-MS04-R |
| Engine Speed | 2,600 RPM |
| Air Filter | Heavy-duty canister air filtration system |
| Fuel Capacity | 12-gallon (45.4-L), side fuel tanks |
| Drive Description | Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler. |
| Fuel Type | Diesel |
| PTO Engagement | Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft |
| Drive Wheel Release | Allows unit movement without engine running. |
| Fuel Indicator | Yes - electronic Sender |
| Deck Lift | Hydraulic |
| Carb Compliant | No |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| ROPS | 2-post foldable ROPS standard with seat belt and latch. |
| DECKS | |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width / Cutting Deck | 60" |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. |
| Cutting Heights | 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat. |
| Blade Tip Speed | Approximately 17,650 fpm. |
| Blades | 3 Blades at 20.50" Length |
| DIMENSIONS | |
| Width | 72.8 in. (184.9 cm) |
| Height | 71.8 in. (182.4 cm) |
| Length | 96.43 in. (244.9 cm) |
| Curb Weight | 1915 |
LZS80TDYM604W0 Features & Benefits
Improved Handling
The engine and radiator have been placed lower to the ground in the redesigned Lazer Z Diesel. This provides an even lower center of gravity leading to improved traction and a smoother ride.
Reduced Maintenance and Service
With an efficient and robust powertrain system, in addition to eliminating drive belts, these machines have less maintenance and longer service intervals. And the tool-less belt access and removable floor pan makes servicing easy.
Fuel Capacity
For longer work intervals, the Lazer Z Diesel has a 12.0-gallon capacity with two tanks. This will keep you mowing longer with fewer fill-ups.
Hydraulic Deck Lift
Standard on all diesel units, the hydraulic deck lift provides for easy cutting height adjustment and quick transport.
Tire Size / Ground Speed
The 26" x 12"-12" drive tires allow you to reach speeds up to 12.5 mph on machines equipped with the 1.6 Liter Common Rail engine. The large drive tires also provide superior traction and handling, giving you the ability to manage diverse terrain and conditions.
Productivity
The robust engine power and large deck sizes make these mowers Exmark's most productive diesel machines ever. They are a great solution for universities, municipalities and other sizeable properties.
On-Board Intelligence
The next generation RED leverages the latest technologies to deliver increased machine efficiency, ease of use and durability. This technology provides users an increased ability to control mower power and efficiency with defined performance modes.
Leading Zero-Turn. Strong Warranty.
Purchase an Exmark Lazer Z Diesel mower with confidence by taking advantage of the protection Exmark provides for you with our five year limited warranty. Now standard on all Exmark Lazer Z Diesel mowers sold in the U.S. or Canada. For complete details, visit your local dealer.
LZS80TDYM604W0 Attachments & Accessories
Request Demo
Request A Demo
Fields with asterisks* are required.