The new Quest V-Series takes electric residential zero-turn mowers to the next level, with the commercial features and performance you expect from Exmark. The electric drivetrain and 42-inch Electric Series 2 cutting deck provide instant torque, while eliminating all belt-related maintenance. The Quest V-Series provides 60 minutes of runtime on four 10-Amp Flex-Force batteries, with the ability to add up to two more batteries for extended runtime.
The low center of gravity design, large drive and caster tires and comfortable operator seat keep you comfortably in control, with increased legroom for the operator. A standard deck step eases mounting and dismounting of the Quest V-Series. Maintenance is minimized with the electric powertrain, integrated hydro transmissions and just two annual grease points.
If you're looking for an electric zero-turn mower with the durability and cut quality of an Exmark, you've found it in the new Quest V-Series.
QZV060B0242H00 Specs & Compare
| EQUIPMENT | |
| UPC | 193308238302 |
| Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Caster Forks | .25" thick caster yoke arms. |
| Front Caster Tires | 11 x 4.0-5 smooth-tread, pneumatic. |
| Drive Tires | 18 x 7.5-8 Turf Tech TL |
| Parking Brake | Foot pedal-actuated |
| Tractor Frame | Unibody, riveted 10-guage steel. |
| Blade Spindles | 7.25"-diameter cast aluminum elctric motor |
| Electrical | 60 volt Flex-Force |
| Standard Features | Lights, hour meter, cup holder and hitch |
| Seat | Units have 16" high-back (no armrests). Hinged mounting with spring suspension. Adjustment fore and aft 3" by loosening 2 bolts and sliding seat. |
| Optional Features | Seat armrests |
| POWER COMPONENTS | |
| Fuel System | Electric |
| Speed | Infinitely variable speed selection from 0-7.0 mph (11.3 kmph) forward, 0-3.5 mph (5.6 kmph) reverse. |
| Drive | Electric |
| Fuel Capacity | 6 pod 12A Rapid Charger w/dual charge modes |
| Drive Description | General Transmission EZ 2000 |
| Fuel Type | Battery |
| PTO Engagement | Switch |
| Deck Lift | Standard; hand lever deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Carb Compliant | No |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock. |
| ROPS | Optional Rigid ROPS with seat belt and latch. |
| DECKS | |
| Deck Style | Floating Deck |
| Deck Style Description | Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch. |
| Width / Cutting Deck | 42" |
| Deck Construction | 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension. |
| Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. |
| Blade Tip Speed | Approximately 17,000 fpm. |
| Blades | 2 Blades at 21.6" Length |
| DIMENSIONS | |
| Width | 53.8 in. (137.0 cm) |
| Height | 45.6 in. (113.0 cm) |
| Length | 75.0 in. (191.0 cm) |
| Curb Weight | 475 |
QZV060B0242H00 Features & Benefits
10-Amp Flex-Force Power System
Quest V-Series is powered by four 10-Amp FlexForce batteries, with the option to run up to six batteries for increased runtime.
Onboard Intelligence
Balances and optimizes power, runtime, and overload protection in real time, for peak performance in the toughest, most challenging mowing conditions.
Lower Noise Output
Exmark's electric mowers operate below the 85dB threshold OSHA uses for hearing protection. These mowers are perfect for HOAs and other quiet zones. *Exmark still recommends proper protective equipment for mower operation.
60V 6-Pod Charger
A 12-amp rapid charger enables you to charge up to six batteries to keep you charged and producing. Two charge modes: sequential rapid mode lets you charge a single 10Ah battery to full charge in just 50 minutes; and standard mode that steadily brings all batteries to full charge in unison.
QZV060B0242H00 Attachments & Accessories
Request Demo
Request A Demo
Fields with asterisks* are required.