AB48 Specs & Compare
| Specification | |
| Hitch | Skid steer quick attach, meets ISO 24410 |
| Weight with combination broom | 706 lbs (320 kg) |
| Overall width | 58" (1.47 m) |
| Overall height | 34" (86 cm) without Orange markers |
| Wafer quantities, poly or wire | 2 Straight poly wafers 23 Convoluted poly wafers |
| Wafer quantities, combination poly and wire | 2 Straight poly wafers 12 Poly convoluted wafers and 11 wire convoluted wafers |
| Sweeping width | 48" (1.22 m) |
| Sweeping width @ 30o max angle | 41 1/2" (1.05 m) |
| Maximum angle | Manual Angling: 15 and 30 Degrees left or right Optional Hydraulic Angling: Infinite positions up to 30 Degrees left or right |
| Brush diameter | 32" (81.3 m) |
| Brush rotor shaft | Quick change broom core with no hydraulic breakage in changeover |
| Hex drive system | Replaceable |
| Brush bristle type | 100% Poly or 50% Poly and 50% Metallic |
| Hood | Sheet Metal |
| Park stands | Standard |
| Float Control | Spring Loaded with adjustable down pressure and stops |
| Hydraulic gpm range | 10-20 gpm (38-76 lpm) |
| Motor Rated Hydraulic flow 29.1 CID motor | 20 gpm (76 lpm) @ 160 rpm rotor speed |
| Minimum hydraulic flow required | 10 gpm (38 lpm) @ 2000 PSI (13.79 MPa) |
| Maximum hydraulic pressure rating | 3500 PSI (24.13 MPa) |
| Brush speed range | 90 - 160 Rpm |
| Hydraulic rotor drive motor | Single motor drive standard |
| Hydraulic hoses | Optional: With manual angling Optional: With hydraulic cylinder angling |
| Hydraulic couplers | Standard: One male and one female flat face couplers |
AB48 Features & Benefits
| Features | Benefits |
| 32" Bristle diameter | Provides for long service life. |
| Choice of poly or combination poly/wire bristles | Allows owner/operators to meet operational needs. Poly/wire combinations provide more wear life and more aggressive sweeping action. |
| Faceted hood design | Provides for a higher level of overall structural integrity. |
| Easily removable brush drive | Allows for quick and easy change out of brushes without opening hydraulic lines. |
| Choice of manual or hydraulic angling | Allows owner/operators to meet budgetary and operational needs. |
| Brush angles 30 degrees to the left or right | Provides for excellent material control and puts sweepings where the operator wants them. |
| Compatible with 10 to 20 gpm (38 to 76 lpm) with hydraulic flow at 2,000 psi (13.8 mPa) to 3,500 psi (20 mPa | Allows attachment to a wide range of track loaders and skid steers. |
| Integral float control design | Spring loaded adjustable down pressure control and stops prevent premature brush wear while providing appropriate surface contact with the rotary brush. |
| 90 to 160 rpm brush rotation | Provides for good sweeping action and material control. |
| Integral park stands | Enables easy dismount, storage, and keeps bristle ends from becoming deformed by supporting the weight of the unit. |
| OPTIONS | |
| Rubber dust deflector flap | Helps keep dust levels under control and down and under the hood cowling and out of the operators field of vision. |
| Metal shroud extension | Extends the broom shroud further forward to help control dust |
| Marker indicators | Aids operator in knowing exact position of extreme left and right edges of the unit for safer and unencumbered operation. |
| Deutsch 14 pin wire harnesses | Fits most track loaders and skid steers. Refer to "Connect Wire Harness (Optional)" on page 20. |
Request Demo
Request A Demo
Fields with asterisks* are required.