KUBOTA BY LAND PRIDE: The BB30 Grading Box Blade allows users the option of rough or precision grading finishes. Basic grading work can be done with the BB3072, BB3084 & BB3096 in applications requiring a rough grade such as landscaping and initial surface prep. Precision grading can be accomplished with the addition of a laser system to accurately control site preparation and flat-work operations. This dual-plane grader tilts and angles to float over the ground for precision grading and is designed specifically for use with Kubota power units.
BB3096 Specs & Compare
| Model | BB3096 |
| Working Width (cm) | 96" (244) |
| Weight (kg) | 2,043 lbs (927) |
| Upper Frame Cross Tube (cm) | 4" x 6" x 5/16" (10.2 x 15.2 x .8) |
| Lower Frame Cross Tube (cm) | 2" x 4" x 1/4" (5.1 x 10.2 x .6) |
| A Frame Tubes (cm) | 4" x 4" x 5/16" (10.2 x 10.2 x .8) |
| Blade Lift Pins (cm) | 1" (2.5) |
| Tilt Pin (cm) | 3" (7.6) |
| Grader Blade (cm) | 1/2" x 6" (1.3 x 15.2), Reversible, replaceable |
| Reversible Side Cutters (cm) | AR400 steel, 6" x ½" (15.2 x 1.3) |
| End Panels (cm) | Replaceable, 3/8" (1) Grade 50 |
| Tires (cm) | 18" x 8.5" x 10" (45.7 x 2 1.6 x 25.4) Foam filled turf |
| Welded Lift Cylinder (cm) | 3" x 6" x 1.5" (7.6 x 15.2 x 3.8) |
| Welded Tilt Cylinders (cm) | 2- 2.5" x 5" x 1.25" (6.4 x 12.7 x 3.2) |
| Parabolic Mirror | 16.5 x 6.63 |
| Hydraulic Flow | 25 GPM max. flow and 3500 psi max. pressure |
| Cylinder Control Valve | Pilot controlled |
| Floating Blades | Front and rear |
BB3096 Features & Benefits
| Features | Benefits |
| Bi-directional with hinged cutting edges | Allows the operator to grade while traveling forward or backward. Hinged cutting edges allow the trailing cutting edge to ride on top of the soil and not dig into the ground. |
| Floating front axle | Allows both gauge wheels to be in contact with the ground at all times keeping the load distributed equally between the two wheels. |
| Reversible and replaceable side cutters. | Side cutters are constructed of abrasion-resistant AR400 steel, can be reversed to increase their wear life, and are replaceable when worn out. They protect the end panels from high wear. |
| Bolt-on and adjustable side cutters | Side cutters can be adjusted down as they wear. |
| Replaceable end panels | End panels are made of grade 50 material and can be replaced should they become damaged or worn out. |
| Optional masts for receiving third party laser technology | See "Supports third part laser/2D" below |
| Plug and play valve controller | Simplifies the process of connecting an auto-grating system to the AP-BB30. |
| Supports third party laser/2D or GPS/3D control system | Tilt and height control can be automated resulting in precision accuracy. Level grade can be achieved in a fraction of the time eliminating operator fatigue and saving money in fill and concrete. |
| Lift/tilt motions kept constant with parallel links | Parallel links keep the blade angle to the soil consistent throughout the blade's range of motion. |
| Foam-filled turf tires | Tires won't go flat. |
Request Demo
Request A Demo
Fields with asterisks* are required.