The standard utility duty RCR2596 & RCR2510 Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right-of ways, pastures, set-aside-acres, and row crop fields. Their 8' and 10' cutting widths, 2" to 12" cutting height and ability to cut weeds and brush up to 1" diameter make them well suited for these applications.
RCR2596 Specs & Compare
| Model | RCR2596 (540 rpm) |
| Machine weight (With front and rear chain shields) | Lift-type 1,380 lbs. Pull-type 1,665 lbs. |
| Hitch | Lift-type Category 1 & 2 Quick-Hitch adaptable Pull-type - w/dual level rods |
| Pull type tongue weight | 651 lbs |
| Cutting width | 7' - 10" |
| Overall width | 8' - 3 3/4" |
| Overall length | Lift-type: 8' - 6" Pull-type: 12' - 1/4" |
| Deck height | 9 5/8" |
| Cutting height | 2" - 12" |
| Cutting capacity | 1 1/2" |
| Tractor power take-off Hp rating | Lift-type: 50 - 110 Pull-type: 40 - 110 |
| Gearbox horsepower rating | Center - 100 hp Outboard 60 hp |
| Gearbox (Speed up beveled gears) | 540 rpm or 1000 rpm pto driven gearbox Cast iron housing, beveled gears |
| Gearbox lubrication | 80-90w EP |
| Gearbox oil capacity End boxes T-box | 2.5 Pints 4.5 Pints |
| Gear box Input/ output shaft size | Input shaft = 1 3/4" - 20 spline Output shaft = 2" dia. |
| Deck material thickness | 10 Gauge |
| Skids | Replaceable |
| Stump jumper | Round pan 3/16" |
| Blades (2) | 1/2" x 4" Heat treated Free-swinging suction blades |
| Blade bolts | Keyed with harden flat washer and lock nu |
| Blade tip speed | 540 rpm 14,592 fpm |
| Driveline | Cat 4, w/equal angle u-joint |
| Driveline protection | 540 rpm - 4 plate slip clutch 1000 rpm - 2 plate slip clutch |
| Tailwheel option Lift-type (2 ea.) Pull-type (2 ea.) | 4" x 8" x 15 1/4" Laminated 6" x 9" x 21" Laminated or 24" recap aircraft tires |
| Optional safety shields | Front & rear chain/ front & rear rubber |
RCR2596 Features & Benefits
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| Tractor horsepower range | 3-point (2596 Model = 50 - 110 hp) & (2510 Model = 60 - 110 hp) Pull-type (2596 Model = 30 - 110 hp) & (2510 Model = 50 - 110 hp) |
| 540 or 1000 rpm | Fits wider variety of tractors. (RCR2596 is 540 rpm only) |
| Gearbox HP rating | 120 Horsepower on splitter gearbox and 60 HP on outboard gearboxes. |
| 3 Gearboxes | Allows equal torque to be spread to left and right gearbox. |
| Splined rubber flex- couplers between the center and outboard gearboxes | Protects the driveline and gearboxes from hard objects in the blade path. |
| Constant velocity u-Joint option on RCR2510 & RCRM2510 pull-type | Reduces chatter and extends life of U-joint during turns. |
| Slip-clutch protection on main driveline | Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact. |
| 3-Point or Pull-type | Pull-type fits older tractors without a top link or smaller tractors without enough lift capacity. (RCR2596 3-point: Cat. 1 & 2) (RCR2510 & RCRM2510 3-point: Cat. 2 & 3) |
| High productive cutting width | RCR2596 cuts 8'-0" width. RCR2510 & RCRM2510 cuts 9'-10" width. |
| Fully welded 10 Gauge deck | Fully welded deck adds rigidity. |
| 3/16" Sidewall thickness | Protects sidewalls from thrown objects. |
| Obstacle free underside | Underside of deck is free of reinforcement members which tend to allow material to lodge. |
| Round back design | Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out. |
| Dual leveling rods on Pull-type | Dual leveling rods eliminate deck twisting when going over uneven terrain. |
| Chain or rubber shield option | Reduces flying debris. |
| Full length skids with replaceable shoes | Adds reinforcement to side panels. Replaceable shoes allows for change before wearing through to weld-on piece. |
| Splined blade hub | Splined blade hub offers tight non-slipping attachment to output shaft. |
| 3/16" Round stump jumper | Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft. |
| 1" x 4" Blade bar | Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft. |
| 1/2" x 4" Heat-treated blades | Heat-treated blades last longer than non-heat-treated blades. |
| 1.5" Diameter cutting capacity | Aids in cutting small brush. |
| High Blade tip speed | RCR2596 (540 rpm) = 14,792 FPM RCR2510 (540 rpm) = 17,749 FPM Means cleaner cutting of material. RCRM2510 (1000 rpm) = 18,035 FPM |
| Laminated tires | Laminated tires can handle almost any condition. |
| Airplane tires (Pull-Type only) | Airplane tires offer smooth roadability. |
| Fits Land Pride Quick Hitch | Allows for quick and easy one person hook-up. |
Request Demo
Request A Demo
Fields with asterisks* are required.