Land Pride's RGA12 3-point Rotary Tillers are gear drive models with forward rotation, while the RGR12 Series are reverse rotation. These American-made tillers feature Cat. 1 hitch, plate steel A-frame and 540 RPM gearbox. Both models include a 17" diameter rotor, 6 "C" shaped tines per flange, and a 7" tilling depth. The rotor is powered by a spur-gear drive in an oil bath with a heavy stamped drive cover. The RGA12 and RGR12 Models are designed for compact tractors up to 60 HP. Reverse tilling is not recommended for rocky soils.
RGR1266 Specs & Compare
| Model Number | RGR1266 |
| Recommended tractor PTO hp | 23 to 60 hp |
| Weight | 567 lbs. |
| Working depth | 7 in. |
| Working width | 66" |
| Overall width | 71 1/2" |
| 3-Point hitch type | Category I, 3-point plate steel A-frame, Fits Land Pride Quick Hitch |
| Driveline | Category 4 with Slip Clutch |
| Optional BX driveline | Category 4 with Slip Clutch, Not recommended with Quick Hitch |
| Number of flanges on rotor | 8 |
| Number of tines per flange | 6 |
| Tine construction | Alloy steel heat-treated “C” shaped blades |
| Rotor rotation | Reverse rotation |
| Rotor swing diameter | 17" |
| Rotor shaft speed | 211 rpm at 540 rpm PTO |
| Rotor bearing mount | Machined cast iron with ball bearings |
| Skid shoes | Adjustable |
| Park stand | Adjustable |
| Rear deflector | Adjustable |
| Front deflector | Rubber |
| Gearbox construction | 60 hp input at 540rpm 1.92:1 ratio, Cast iron housing with ASAE 1 3/8" - 6 spline shaft, tapered roller bearings, bevel gears, drain plug, level plug & fill plug |
| Gearbox lubrication | 2 Pints of SAE 80-90W EP oil |
| Drive end construction | Spur gears enclosed in an oil bath with oil level plug or sight glass and oil fill/breather plug |
| Gear case lubrication | 6 Pints of SAE 80-90W EP oil |
| Spur gears | Case hardened teeth |
RGR1266 Features & Benefits
| Features | Benefits |
| American made | American made means better quality & parts availability. Most tillers are imported. |
| Tractor hp range 42" & 50" 58" & 66" 74" 82" | 18-60 hp 23-60 hp 30-60 hp 35-60 hp |
| Reverse tilling action (RGR only) | Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can. |
| 42", 50", 58", 66", 74", & 82" Working widths | A wide range of widths are available to meet specific customer needs. |
| 7" Tilling depth | For deep soil penetration. |
| Formed plate steel upper hitch | Plate steel is stronger than flat bar type hitch. |
| Fits Land Pride Quick Hitch | Allows for quick and easy one person hook-up. |
| Park stand | Allows for easy hook-up and storage. |
| Adjustable skid shoes | Control depth with seven adjustments |
| Formed and reinforced rear deflector | Keeps dirt in and leaves a level finish. Forming gives deflector additional strength. Adjustable deflector allows for various finish results. |
| Front deflector (RGR only) | Front deflector is flexible to take the beating from rocks or debris. |
| Bolt in rotor | Rotor removes and replaces easier for servicing. |
| 17" Rotor swing diameter | For deep tilling and turns the soil over faster. |
| Six “C” shaped, heat-treated tines per flange | “C” Shaped tines require less hp to move through the ground. Six tines per flange make for a better seedbed in less time than four tines. |
| Double lip seal on rotor bearing | Double lip seal helps keep the dirt out and the grease in. |
| Fully shielded slip-clutch driveline | Protects gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins. |
| Gear drive enclosed in oil bath | Gear drive requires less maintenance than roller chain drive. Oil bath keeps wear to a minimum. |
| Stamped gear case cover | Stamped forming gives the chain cover strength. |
| Optional BX driveline | This driveline will fit B and BX Kubota tractors without cutting it to fit. Not quick hitch adaptable for B & BX Kubota tractors. |
Request Demo
Request A Demo
Fields with asterisks* are required.