The Land Pride RTR25, like all Land Pride reverse rotation tillers, achieves greater depth of penetration, moving and pulverizing more soil in the process, while burying residue as opposed to leaving it on top. The 3" rotor shaft provides extra strength and the Cat. 3 driveline with slip-clutch protection keeps productivity up. The spring loaded rear-deflector shield helps produce a perfect seedbed.
RTR2570 Specs & Compare
| Model | RTR2570 |
| Recommended Tractor PTO HP | 25-75 Horsepower |
| Weight | 868 lbs. |
| Tilling Width | 70" |
| Overall Width | 76 3/4" |
| 3-Point Hitch Type | Category 1 with Adjustable lower Hitch Clevises Fits Land Pride Quick Hitch |
| Offset Capabilities | Yes (Cannot offset with Quick Hitch) |
| Number of Flanges | 9 |
| Number of Tines per Flange | 6 ea. “C” shaped blades |
| Tine Construction | High Carbon heat treated “C” shaped blades |
| Skid Shoes | Adjustable |
| Storage Stands | Adjustable |
| Rear Deflector | Spring Loaded, adjustable, profile stamped rear deflector |
| Front Protector | Plate with reinforced rubber insert |
| Driveline | ASAE Category III Heavy Duty Friction Clutch-Standard |
| Gearbox | 45 HP Input at 540 rpm 1.92:1 Ratio Cast Iron Housing, Straight Bevel Gears |
| Gearbox Oil Capacity and Type | 1.65 Pints of Gear Lube 80-90W EP |
| Drive Chain | #100 Roller chain Fully enclosed in oil bath with drain plug, fill plug and skid protection |
| Drive Chain Lubrication | Shell Gadus S2 V2200 00 flowable grease or equivalent Land Pride Part #821-045C (32 oz. bottle) |
| Sprockets | Hardened Teeth |
| Rotor Swing Diameter | 17" |
| Rotor Shaft Speed | 220 rpm at 540 rpm PTO |
| Coil Spring "Sifting" Tines | 46 |
RTR2570 Features & Benefits
| FEATURES | BENEFITS |
| American made | Many tillers are imported. American made means better parts availability. |
| Reverse tilling action | Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can. |
| Tractor HP Rating | 25-75 HP |
| Stamped upper hitch plate | Stamped plate adds additional strength to hitch. |
| Hitch bolted to inside of support | Force is applied downward on top hitch, by bolting hitch to inside of support, keeps hitch from spreading outward. |
| Hitch Offset capability | Offset 5” by moving lower hitch points, allows to cover right tire track. |
| Fits Land Pride Quick-Hitch | Allows for quick and easy one person hook-up. Cannot be used with offset. |
| Adjustable Parking stand | Allows for easy hook-up and storage. |
| Adjustable skid shoes | Control depth from various settings. |
| Wear shield on left skid shoe | Shield protects lower portion of chain cover from wearing due to dragging in the soil. |
| Formed rear deflector with springs | Formed steel gives the rear deflector additional strength. Springs allow deflector to bounce as it hits obstructions. |
| Front deflector plate | Front deflector plate is flexible to take the beating rocks or debris will give it. |
| Material separator behind tilling action | 3/8" Rods sift material letting bigger items fall first. Sifted soil falls last burying the bigger items. Attachment is one all welded piece for easy assembly. |
| Front deflector plate | Front deflector plate is flexible to take the beating rocks or debris will give it. |
| Six tines per flange | Six tines go through the ground better than four. |
| “C” Tines | C Tines take less horsepower to move through the ground. |
| 3” O.D. x 1/4" wall tubing with stub shafts on ends | Superior strength in oversize tubing. |
| 17” Rotor swing diameter | For deep tilling action. |
| Double lip seal on rotor bearing | Double lip seal keeps the dirt out and the grease in. |
| Cat. 3 driveline with slip-clutch protection | Heavy driveline for rough conditions. Slip-clutch protects other drive train components and saves having to replace shear bolts. |
| #100 Drive chain enclosed in oil bath | Heavy-duty drive chain reduces stretching. Oil keeps constant lubrication and holds wear to a minimum. |
| Easy to adjust chain tightener | Cast iron chain tightener is a simple bolt adjustment to keep constant tension on the chain. |
| Stamped chain cover | Stamped forming adds additional strength. |
| Spring tines behind tilling action | Spring tines sift the material letting bigger items fall first. Sifted soil falls last burying the bigger items. |
Request Demo
Request A Demo
Fields with asterisks* are required.