Inverted Design
Allows operators to back up to obstacles like buildings or fences, set the blower down, and drive away, offering the operator clear, forward visibility.
Steel Skid Shoes
Replaceable and adjustable. ***Polyethylene Edge and Skid Shoe Kit also available.
Chute
Snow is thrown by the impeller through the chute that can be manually or hydraulically operated.
Impeller
24" x 7" impeller throws snow into the chute.
SBP1174 Specs & Compare
| MODEL | SBP1174 Model |
| Weight without options | 620 lbs (281 kg) |
| Working width | 73 1/2" (187 cm) |
| Overall width | 76 1/4" (194 cm) |
| Tractor horsepower | 25 to 55 hp (18.6- to 41 kW) |
| Hitch type | Three-Point Cat. l hitch |
| Quick hitch compatible | Yes |
| Main housing material | 14 gauge (1.9 mm) |
| Chute opening at the base | 8" (20 cm) diameter |
| Impeller diameter | 24" (61 cm) |
| Impeller depth | 7" (18 cm) |
| Auger diameter | 15" (38 cm) |
| Auger drive | #60 roller chain with take-up idler sprocket |
| Cutting edge | Constructed of 3/8" x 1 1/2" (1 cm x 3.8 cm) carbon steel and are replaceable |
| Skid shoes | Constructed of 3/8" x 2 5/8" (1 cm x 6.7 cm) carbon steel, are replaceable, and can be adjusted to 3 different height positions |
| Gearbox oil type and capacity | Approximately 0.8 pints (0.38 L) of SAE 80-90W EP gear lube or equivalent |
| Driveline category | Cat. l, shear bolt protected, and rated for 540 rpm speed |
| Driveline shear bolt | One M8 x 125 mm x 50 mm GR8.8 |
| Drive shaft shear bolt | One 1/4"-20 x 1 1/4", Gr2 |
| Optional Equipment & Weight | |
| Manual chute rotation | Hand crank with worm drive |
| Hydraulic chute rotation | Hydraulic motor with sprocket drive |
| Accessory Equipment & Weight | |
| Tivar skid shoes & cutting edge | 1" (2.5 cm) thick skid shoes, 1" x 3 1/2" (2.5 x 8.9 cm) cutting edge |
SBP1174 Features & Benefits
| Features | Benefits |
| Pull behind tractor operation | Less strain on operator. Operator doesn't have to look over their shoulder continuously while operating. |
| Quality gearbox | Provides long life, durable construction. |
| Greasable bearings | Less drag and extends life of unit. |
| Quick Hitch compatible | Makes for faster and easier connecting to tractor. |
| Large main housing | Ability to handle large drifts. |
| 1 1/2" x 2 1/2" Frame cross-tube | Adds strength and rigidity to the Snow Blower housing. |
| Large 15" (38 cm) auger diameter | Directs large amounts of snow into impeller for removal. |
| Large 24" (61 cm) impeller diameter | Has the ability to move and throw large amounts of snow without clogging. |
| Adjustable full length steel skid shoes | Skid shoes can be replaced before housing side panels are exposed to wear. Skid shoes can be adjusted to three different heights to support cutting edge above crushed rock and gravel. |
| Bolt-on replaceable steel cutting edge | Protects against wear on the auger housing and improves service life of the Snow Blower. |
| Shear bolt protected gearbox, drive shaft, impeller, and auger | Eliminates costly repairs. |
| Guarded discharge chute | Guards against operator putting their hands into the impeller. |
| Adjustable chute deflector | Gives the operator the ability to change distance snow is being blown. |
| Options | |
| Optional hydraulically controlled chute rotation | The operator can change direction snow is blown while siting on the tractor seat. |
| Accessory | |
| Tivar cutting edge and skid shoe Kit | Tivar protects against gouging and nicking surfaces such as sidewalks, driveways, and paved roads. |
Request Demo
Request A Demo
Fields with asterisks* are required.