Battery-powered rammers: vibratory rammers with battery-powered electric motor. 100% emission-free!
Item Number
5100053792
AS50e Specs & Compare
| Model Variations | AS50e |
| Range (met) | BOB14: 352 m |
| Nominal current | 41 A 41 A |
| Nominal voltage | 51 V 51 V |
| Nominal power [P] | 2.1 KW 2.1 KW |
| Number of blows | 680 1/min 680 1/min |
| Area capacity | 1,582.3 ft2/h 147 m2/h |
| Power of impact | 3,596.9 lbf 16 kN |
| Length | 24 " 610 mm |
| Length Ramming Shoe | 13.4 " 340 mm |
| Width | 14.3 " 363 mm |
| Width Ramming Shoe | 11 " 280 mm |
| Height | 41.3 " 1,050 mm |
| Weight | 135.58 lb 61.5 kg |
| Operating weight | 156.5 lb 71 kg |
| Stroke at tamper | 1.5 " 39 mm |
| Motor type | Asynchronous motor |
| Lubrication intervall | 250 h 250 h |
| Degree of protection | IP23D |
| HAV summation (average value) | 25.3 ft/s2 7.7 m/s2 |
| HAV summation (Standard) | EN 500-4 |
AS50e Features & Benefits
The battery-powered rammer allows the operator to work completely free of emissions The battery-powered rammer is a win for soil compaction in trenches and inner cities as well as lightening the load for the operator and environment on every construction site. One battery charge is enough to finish all the tasks of an average workday. The battery can be easily changed without tools and can be used for a variety of other Wacker Neuson construction equipment.
Low energy costs
- As electric power is much cheaper than fuel, very low operating costs are incurred. The result is substantial savings over the entire long service life of the machine.
No exhaust emissions
- The operator is not exposed to any exhaust emissions. Therefore, the machine can be used without restrictions in trenches, tunnels and interior spaces. For the operator, work becomes more pleasant and healthy than with fuel-operated machines.
- Because the machines are emission-free, new applications open up in areas with special requirements for environmental friendliness.
Maintenance-free electric motor
- Maintenance work is completely eliminated compared to combustion engines For example, there are no problems with dirt accumulation or inferior oil. This significantly reduces maintenance effort and costs over the long service life of the machine.
Starts with a push of a button
- The battery can be started easily and reliably with the push of a button, even at low temperatures or at altitudes.
- Starting with the push of a button is much more convenient than starting with pulling a cable.
One battery for all products
- The battery can also be used for all other Wacker Neuson battery-powered equipment. This means saving costs when procuring other equipment.
MORE FEATURES
VARIETY
Removable battery
- The battery can be easily removed without tools and used in another machine. This makes it quick and easy to use a single battery for serveral machines on the construction site.
- It is possible to swap a discharged battery for a charged one very easily and quickly on the construction site.
PERFORMANCE
Long running time with one battery charge
- One battery charge is usually enough for the typical tasks of a full workday. As a result, the work process doesn't have to be interrupted by recharging and not replacement battery is required.
Request Demo
Request A Demo
Fields with asterisks* are required.